Forced draft 100mm Centrifugal Fan , 316L Stainless Steel Blower Fan

High Temperature Centrifugal Blower Fan Rotating Fan 100mm Centrifugal Fan High Quality Stainless Steel

During the high temperature centrifugal fan test, at least two people, one is the power controller and one is the fan operation supervisor, balance the parking for about 5 minutes, check whether the fan is abnormal, and reconnect.
In the high-temperature centrifugal fan test, the fan is started low-key, the correct rotation direction is checked, and when the fan is started quickly, it is started after shutting down to avoid switch rupture and engine damage caused by high-speed reversal.
When the high temperature centrifugal fan reaches the normal rotation speed, if the working current exceeds the rated current, the normal voltage is checked.

When testing the fan, the inlet and outlet valves of the fan should be closed as much as possible, and gradually opened at the end of the operation to ensure that the inlet and outlet valves of the fan are always open until the fan is completely opened. The working current of the fan exceeds the rated current before reaching the specified working state.
Commissioning the high temperature centrifugal fan to the ideal state can make it play a greater role and bring better use effect and work efficiency to users.

Key Features

• Impeller diameter: 70~3500 mm
• Speed of mainshaft: 560~2900 rpm
• Pressure range: 1000~25425 Pa
• Flow range: 3297~733050 m3/h
• Air Temperature: 20~1000 Celsius degree

• Material: Cast Iron, Carbon Steel, Stainless Steel.

• Efficiency: 70%-90%

100mm Centrifugal Fan

Centrifugal Fan 100mm

316L Stainless Steel Blower Fan

Forced draft 100mm Centrifugal Fan , 316L Stainless Steel Blower Fan Images